Asphalt Driveway Cost in Alabama (2026)
Stoutwell Paving · October 10, 2026 · 7 min read
A new asphalt driveway in Alabama typically costs $7 to $13 per square foot installed, including materials, labor and minor grading. An overlay on a sound driveway runs $3 to $7, sealcoating $0.88 to $2.10, and tearing out an old surface typically $2 to $4. Your own number comes from a free written quote, and in Alabama it turns on three things: the ground under the drive, the rain, and how far north you live.
At a glance:
- A 12 by 50 foot two-car driveway works out to $4,200 to $7,800 new.
- Around Prattville, Montgomery and Wetumpka, clay over Selma Chalk swells when wet and cracks when dry, so the base line on the quote can grow.
- Huntsville averages 55.6 nights a year at or below freezing; Dothan averages 21.0.
- October is the driest month of the year at both Dothan and Montgomery.
- A drive onto a state route needs an ALDOT turnout permit, and a single-family parcel gets one.
What Does an Asphalt Driveway Cost in Alabama?
The chart below runs each typical range across the same two-car driveway, 12 by 50 feet.
| Job | Range per square foot | Two-car driveway, 12 by 50 feet | Where it fits in Alabama |
|---|---|---|---|
| New asphalt driveway | $7 to $13 | $4,200 to $7,800 for 600 sq ft | Top half on Black Belt clay or with a state highway apron |
| Overlay of an existing driveway | $3 to $7 | $1,800 to $4,200 | Only where the old base still holds, often the Wiregrass sands |
| Driveway sealcoating | $0.88 to $2.10 | $528 to $1,260 | Sooner and more often north of Birmingham, where freezes open cracks |
| Removing an old driveway | $2 to $4 | $1,200 to $2,400 | Added to a new driveway when the old one has failed at the base |
Inside each range, the base often decides much of the price: how much soft soil comes out, how much compacted stone goes back in, and where the water leaves the drive.
What Changes the Price of a Driveway in Alabama
Clay that moves under the asphalt. Alabama Extension’s soil publication for the Montgomery, Prattville and Wetumpka area (ANR-0966) describes clayey soils over Selma Chalk that “swell when wet and shrink when dry, resulting in large cracks forming.” Asphalt bends with whatever it sits on, so on these soils the job may call for digging out soft clay, compacting a deeper stone base and shaping the drive so runoff does not pool along its edges. That excavation and base line is often the reason two driveways of the same size in central Alabama price differently.
Rain in every season. NOAA’s state climate summary gives Alabama 55.4 inches of precipitation a year, spread fairly evenly apart from a drier stretch from August to October, and the normals for Mobile reach 67.08 inches. Rain moves two lines. Drainage: the crown, the slope and the path water takes off the apron. Scheduling: ALDOT’s own paving specifications bar tack coat on a wet surface, and we hold to the same rule, so a soaked week pushes the start date rather than the price.
Freezing nights in the north. On NOAA’s 1991 to 2020 normals, Huntsville International Airport averages 55.6 nights a year at or below 32 degrees and Birmingham 47.0, against 21.0 at Dothan Regional Airport. Water that gets into a crack and freezes pries it wider, so a north Alabama driveway may need a base that drains through winter and a closer schedule of crack filling and sealcoating.
Long hot summers in the south and center. Montgomery’s airport averages 92.7 days a year at 90 degrees or hotter, and Dothan’s 89.3. New asphalt stays soft for days in that heat, so we keep you off it longer and ask you not to turn the steering wheel while parked. Heat moves the cure window and the hour we seal (mornings in July), not the square-foot range.
Where the drive meets a state highway. ALDOT’s Access Management Manual (September 2022) calls a driveway a turnout and requires a permit “so that the location and construction methods are acceptable.” It lists a 12-foot minimum width and a 25-foot minimum radius for a single-family lot, which sets a floor on the size of the apron we pave at the road.
Driveway Paving Across Alabama’s Regions
The Wiregrass: Dothan and Houston County. We grade and pave across Dothan and the towns of Houston County. The USDA’s official description of the Dothan soil series calls it very deep and well drained, formed in marine sediments, with permeability that can turn slow in its deeper layers. That sandy loam makes a forgiving base, so the work goes into grade and runoff: Dothan’s normals put 17.20 inches of rain between June and August. See Dothan asphalt driveway paving and Dothan pricing.
The Black Belt edge: Prattville, Autauga and Elmore counties. We pave and seal in Prattville, Millbrook, Wetumpka and the surrounding towns. This is where the Selma Chalk clays sit, alongside sandier upland soils and floodplain ground that Alabama Extension says stays saturated most of the year. Two lots on the same street can need different base depths, which is why we look at the ground before pricing. Start with Prattville asphalt driveway paving and Prattville pricing.
North Alabama: Birmingham to Huntsville. The freeze count is the story: 55.6 freezing nights a year at Huntsville and 47.0 at Birmingham, and 2.4 inches of normal snowfall at Huntsville against 0.2 at Mobile. Before a date is booked, check how the base drains under the asphalt and ask for a sealcoating schedule in writing.
The Gulf coast: Mobile. Mobile’s 67.08 inches of yearly rain and 77.5 days at 90 degrees or hotter make runoff and summer scheduling the questions to raise on a quote.
What to Check Before You Hire a Paver in Alabama
- The license. Alabama’s Home Builders Licensure Board licenses residential home builders and remodelers for repair, improvement or reimprovement of a residence or structure “when the cost of the undertaking exceeds ten thousand dollars ($10,000)”, and the law defines an improvement as an addition or enhancement “attached to or detached from a residence or structure.” The board does not name driveways. Check any license number with its Look Up a License search. The board decides what applies to your project.
- The permit. Who files the ALDOT turnout permit, or the city or county approval for a curb cut, and whether its fees are in the quote.
- The base on paper. Stone base depth, compacted asphalt thickness, and how much clay comes out first.
- Where the water goes. The slope, the crown and where runoff ends up.
- The cure window. When you can drive on it, and when the first sealcoat should go down. How long asphalt takes to cure sets out the timing.
If you are unsure whether to resurface or start over, asphalt overlay vs replacement walks through the choice.
Frequently Asked Questions
How much does an asphalt driveway cost in Alabama?
A new asphalt driveway typically runs $7 to $13 per square foot installed, which puts a 12 by 50 foot two-car driveway at about $4,200 to $7,800. Shrink-swell clay around Prattville and Montgomery, or a turnout onto a state highway, can push a job toward the top of that range. Your own number comes from a free written quote.
When is the best time of year to pave a driveway in Alabama?
Fall is the easiest window in the south and center of the state: October is the driest month in NOAA’s normals for both Dothan and Montgomery. Summer works too, but afternoon storms cost days and the heat keeps fresh asphalt soft for longer. In north Alabama, plan around the 55 or so freezing nights Huntsville averages each winter.
Do I need a permit to pave a driveway onto a state highway in Alabama?
Yes. ALDOT treats a driveway onto a state route as a turnout and requires a permit so it can approve the location and construction method. For a single-family home it allows one access point per existing parcel, with a minimum width of 12 feet. City streets and county roads follow local rules, so ask the city or county office.
Does a paving contractor need a license in Alabama?
Alabama’s Home Builders Licensure Board licenses residential home builders and remodelers once the cost of the undertaking exceeds $10,000, and its definition of an improvement includes work attached to or detached from a residence. It does not name driveways. Look any license up on the board’s website. The board decides what applies to your project.
Get an Asphalt Driveway Quote in Alabama
Send us your city or ZIP, the rough length and width of the drive, photos of the current surface with any cracks or soft spots, where water runs after a storm, and whether the drive meets a state highway. We measure the ground, the base and the apron, then put the job in writing. For what each range includes, read the asphalt driveway cost guide.
Ready for a Price on Your Property?
Guides give general ranges. Your free quote covers your own lot or driveway.
Cost Guides Asphalt Sealcoating Cost in Dothan, AL
What sealing a Dothan driveway costs: typically $0.88 to $2.10 per square foot, how Dothan's rain days shape the schedule, and what to ask a quote.
Cost Guides Sealcoating Cost in Prattville, AL
How much it costs to seal a driveway in Prattville, AL: the typical per-square-foot range, what a quote pays for, and the weather limits sealer brings.
Guides Huntsville, AL Parking Lot Upkeep and Cost
Our Huntsville prices: sealcoating $0.15 to $0.30 per sq ft and restriping $4 to $5 per stall. How often should a Tennessee Valley lot be sealed? Free quote.
Ready for a Free Quote?
Get a free, no-obligation quote for your Alabama driveway.
Get Your Free QuoteOr call us directly: (919) 219-2946
Final scope, schedule, and pricing are confirmed after an on-site inspection and documented in the written project agreement.
Get a free quote for your lot
We seal, stripe and repair lots for churches, schools and shopping centers.